RM RM Eye Bedienerhandbuch PDF herunterladen (Seite 4)

PRECAUTIONS

BASIC INSTRUCTIONS

• To avoid electrical shock, do not open the instrument. Refer all servicing to only qualified personnel.

• Electrical shock may cause burns or possible fire. Turn the main power switch OFF and

UNPLUG the power cord before replacing fuses. Replace only with fuses of the correct rating.

• To avoid potential injury during operation, do not touch the patient’s eyes or nose with the instrument.

WORKING ENVIRONMENT

Temperature: 10°C-40°C

Humidity: 30-90% (without dew)

Atmospheric Pressure: 700hPa-1,060hPa

STORAGE, USAGE PERIOD AND OTHERS

1. ENVIRONMENTAL CONDITIONS FOR INSTALLATION (WITHOUT PACKAGE)

Temperature: 10 °C-40 °C

Humidity: 10%~95% (without dew)

Air Pressure: 700hPa-1,060hPa

THIS INSTRUMENT DOES NOT MEET THE TEMPERATURE REQUIREMENTS OF ISO 15004-1 FOR STORAGE.

DO NOT STORE THIS INSTRUMENT IN CONDITIONS WHERE THE TEMPERATURE MAY RISE ABOVE 40°C OR FALL

BELOW 10°C.

2.WHEN STRING THE INSTRUMENTS, ENSURE THAT THE FOLLOWING CONDITIONS ARE MET:

(1) The instrument should not be splashed with water.

(2) Store the instrument where air pressure, temperature, humidity, ventilation, sunlight,dust,

salty/sulfurous air, etc. do not give any negative side water.

(3) Do not store or transport the instrument on a slope or uneven surface or in an area where

it is subject to vibrations or instability.

(4) Do not store the instrument where chemicals are stored or gas is generated.

3.USAGE PERIOD

8 years from delivery providing regular maintenance is performed (according to the self-cer-

tification [Topcon data])

ENVIRONMENTAL CONDITIONS FOR PACKING IN TRANSPORTATION

Temperature: -40°C~70°C

Humidity: 10%-95%

MAINTENANCE AND CHECKS

1.Regularly maintain and check all equipment and parts.

2.Before using equipment that has not been used in a while, be sure to confirm normal and

safe operation beforehand attempting any patient measurements.

3.Keep the examination window free from finger prints and dust.

4.When the instrument is not in use, protect the instrument by covering it with the dust cover.

5.When the examination window becomes dirty or soiled, clean it according to the instructions

listed in “CLEANING THE INSTRUMENT” on page 83 of the Instruction Manual.

1 2 3 4 5 6 7 8 9 ... 91 92

Keine Kommentare

RM RM Eye Bedienerhandbuch Seite 4